Configure Ripng Delete - Extreme Networks ExtremeWare XOS Command Reference Manual

RIPng Commands

configure ripng delete

configure ripng delete [vlan <vlan-name> | tunnel <tunnel-name>
| [vlan | tunnel] all]
Description
Removes an interface from RIPng routing.
Syntax Description
vlan-name
tunnel-name
all
Default
N/A.
Usage Guidelines
This command removes an interface from RIPng routing. However, the RIPng-specific interface
configuration will be preserved, even if RIPng is unconfigured on the interface. The interface
configuration information is removed only when the IPv6 interface itself gets deleted by, for example,
by unconfiguring all the IPv6 addresses on the interface.
Example
The following command removes the VLAN finance from RIPng routing:
configure ripng delete finance
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1250
Specifies an IPv6 configured VLAN.
Specifies an IPv6 tunnel.
Specifies all IPv6 configured VLANs or tunnels.
ExtremeWare XOS 11.3 Command Reference