Configure Ospf Area Delete Range - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ospf area delete range

configure ospf area <area-identifier> delete range [<ip-address> <ip-mask>
| <ipNetmask>]
Description
Deletes a range of aggregated IP addresses in an OSPF area.
Syntax Description
area-identifier
ip-address
ip-mask
ipNetmask
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes an aggregated IP address range:
configure ospf area 1.2.3.4 delete range 10.1.2.0/24
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies an OSPF area.
Specifies an IP address.
Specifies a subnet mask.
Specifies IP address / Netmask.
configure ospf area delete range
1295