Configure Vlan Router-Discovery Add Prefix - Extreme Networks ExtremeWare XOS Command Reference Manual

IPv6 Unicast Commands

configure vlan router-discovery add prefix

configure vlan <vlan_name> router-discovery {ipv6} add prefix <prefix>
Description
Adds a prefix to the router discovery advertisements on the VLAN.
Syntax Description
vlan_name
prefix
Default
N/A.
Usage Guidelines
This command adds a prefix to the router advertisement messages for the VLAN. Prefixes defined with
this command are only included in the router advertisement messages and have no operational impact
on VLANs.
To configure the parameters for this prefix, use the following command:
configure vlan <vlan_name> router-discovery {ipv6} set prefix <prefix> [autonomous-
flag <auto_on_off> | onlink-flag <onlink_on_off> | preferred-lifetime <preflife>
|valid-lifetime <validlife>]
Example
The following command adds the prefix 2001:db8:3456::/64 for the VLAN top_floor:
configure vlan top_floor router-discovery add prefix 2001:db8:3456::/64
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1176
Specifies an IPv6 configured VLAN.
Specifies the prefix to add.
ExtremeWare XOS 11.3 Command Reference