Create Vrrp Vlan Vrid - Extreme Networks ExtremeWare XOS Command Reference Manual

create vrrp vlan vrid

create vrrp vlan <vlan_name> vrid <vridval>
Description
Creates a VRRP virtual router on the switch.
Syntax Description
vlan_name
vridval
Default
N/A.
Usage Guidelines
VRRP Virtual Router IDs can be used across multiple VLANs. You can create multiple virtual routers on
different VLANs. Virtual Router IDs need not be unique to a specific VLAN.
Before configuring any virtual router parameters, you must first create the VRRP instance on the switch.
If you define VRRP parameters before creating the VRRP, you may see an error similar to the following:
Error: VRRP VR for vlan vrrp1, vrid 1 does not exist.
Please create the VRRP VR before assigning parameters.
Configuration failed on backup MSM, command execution aborted!
If this happens, create the VRRP instance and then configure its parameters.
Example
The following command creates a VRRP router on VLAN vrrp-1, with a VRRP virtual router ID of 1:
create vrrp vlan vrrp-1 vrid 1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of 1-
255.
create vrrp vlan vrid
1057