Show Ospf Virtual-Link - Extreme Networks ExtremeWare XOS Command Reference Manual

OSPF Commands

show ospf virtual-link

show ospf virtual-link {<router-identifier> <area-identifier>}
Description
Displays virtual link information about a particular router or all routers.
Syntax Description
router-identifier
area-identifier
Default
N/A.
Usage Guidelines
area-identifier—Transit area used for connecting the two end-points. The transit area cannot have an
area identifier of 0.0.0.0 and cannot be a stub or NSSA area.
Example
The following command displays virtual link information about a particular router:
show ospf virtual-link 1.2.3.4 10.1.6.1
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1348
Specifies a router interface number.
Specifies an OSPF area.
ExtremeWare XOS 11.3 Command Reference