Configure Irdp - Extreme Networks ExtremeWare Command Reference Manual

configure irdp

configure irdp [multicast | broadcast]
Description
Configures the destination address of the router advertisement messages.
Syntax Description
multicast
broadcast
Default
Multicast (224.0.0.1).
Usage Guidelines
None.
Example
The following command sets the address of the router advertiser messages to multicast:
configure irdp multicast
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies multicast setting.
Specifies broadcast setting.
configure irdp
1175