Debug Ip Dhcp Server - Dell C9000 Series Reference Manual

Dell(conf-if-fo-2/0)#do show logging
Syslog logging: enabled
(40960 bytes)
Jan 7 01:42:34: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT:
Jan 7 01:41:39: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: Received DHCPACK packet in InterfaceFo 2/0 with
Lease-IP:100.1.1.253, Mask:255.255.255.0, Server-Id:100.1.1.2
Jan 7 01:41:39: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT:
Jan 7 01:41:36: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT: Received DHCPOFFER packet in Interface Fo 2/0
with Lease-Ip:100.1.1.253, Mask:255.255.255.0,Server-Id:100.1.1.2
Jan 7 01:41:36: %SYSTEM:CP %DHCLIENT-5-DHCLIENT-LOG:
DHCLIENT_DBG_PKT:

debug ip dhcp server

Display Dell OS debugging messages for DHCP.
C9000 Series
Syntax
debug ip dhcp server [events | packets]
Parameters
events
packet
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.0)
Console logging: level debugging
Monitor logging: level debugging
Buffer logging: level debugging, 5 Messages Logged, Size
Trap logging: level informational
Logging to 10.10.10.4
Logging to 10.1.2.4
Logging to 172.31.1.4
Logging to 133.33.33.4
Logging to 172.16.1.162
Last logging buffer cleared: Jan 7 01:41:17
DHCP RELEASE sent in Interface Fo 2/0
DHCP REQUEST sent in Interface Fo 2/0
DHCP DISCOVER sent in Interface Fo 2/0
Enter the keyword events to display the DHCP state changes.
Enter the keyword packet to display packet transmission/
reception.
Description
Introduced on the C9010.
Introduced on the S6000-ON.
Dynamic Host Configuration Protocol (DHCP) 805