Show Macauthentication Session; Show Macauthentication Session Output Details - Enterasys SECURESTACK C3 Configuration Manual

Table 26-3 show macauthentication Output Details (Continued)
Output Field
Reauth Period
Auth Allowed
Auth Allocated
Reauthentications

show macauthentication session

Use this command to display the active MAC authenticated sessions.
Syntax
show macauthentication session
Parameters
None.
Defaults
If port‐string is not specified, MAC session information will be displayed for all MAC
authentication ports.
Mode
Switch command, read‐only.
Usage
Changing the Reauth Period with the set macauthentication reauthperiod command does not
affect current sessions. New sessions display the correct period.
Example
This example shows how to display MAC session information:
C3(su)->show macauthentication session
Port
-----
ge.1.2
Table 26‐4 provides an explanation of the command output.
Table 26-4 show macauthentication session Output Details
Output Field
Port
MAC Address
Duration
What It Displays...
Reauthentication period for this port. Default value of 30 can be changed using the
set macauthentication reauthperiod command (page 26-33).
Number of concurrent authentications supported on this port.
Maximum number of MAC authentications permitted on this port.
Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command (page 26-32).
MAC Address Duration
----------------- ---------- -------------
00:60:97:b5:4c:07 0,00:52:31
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
MAC address associated with the session.
Time this session has been active.
Reauth Period Reauthentications
-----------------
3600 disabled
CLI" on page 7-1.
SecureStack C3 Configuration Guide 26-27
show macauthentication session