Clear Dot1X - Cisco Catalyst 3560-X Command Reference Manual

clear dot1x

clear dot1x
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-92
Downloaded from www.Manualslib.com
Use the clear dot1x privileged EXEC command on the switch stack or on a standalone switch to clear
IEEE 802.1x information for the switch or for the specified port.
clear dot1x {all | interface interface-id}
all
interface interface-id
No default is defined.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
You can clear all the information by using the clear dot1x all command, or you can clear only the
information for the specified interface by using the clear dot1x interface interface-id command.
This example shows how to clear all IEEE 8021.x information:
Switch# clear dot1x all
This example shows how to clear IEEE 8021.x information for the specified interface:
Switch# clear dot1x interface gigabithethernet1/0/1
You can verify that the information was deleted by entering the show dot1x privileged EXEC command.
Command
show dot1x
manuals search engine
Chapter 2
Clear all IEEE 802.1x information for the switch.
Clear IEEE 802.1x information for the specified interface.
Description
Displays IEEE 802.1x statistics, administrative status, and operational
status for the switch or for the specified port.
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02