Telnet Server Enable - Cisco Nexus 5500 Series Command Reference Manual

Chapter T Commands

telnet server enable

To enable the Telnet server, use the telnet server enable command. To disable the Telnet server, use the
no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Enable
Command Modes Global configuration mode
Command History Release
5.2(1)N1(1)
Examples This example shows how to enable the Telnet server:
switch(config)# telnet server enable
This example shows how to disable the Telnet server:
switch(config)# no telnet server enable
Related Commands Command
show telnet server
OL-27883-02
telnet server enable
no telnet server enable
Modification
This command was introduced.
Description
Displays the Telnet server status.
Cisco Nexus 5500 Series NX-OS Security Command Reference
telnet server enable
349