Telnet Server Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

telnet server enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
telnet server enable
To enable the Telnet server if you wish to return to a Telnet connection from a secure SSH connection,
use the telnet server enable command. To disable the Telnet server, use the no form of this command
Syntax Description This command has no arguments or keywords.
Defaults
Enabled.
Command Modes
Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples
The following example enables the Telnet server.
switch(config)# telnet server enable
updated
The following example disables the Telnet server.
switch(config)# no telnet server enable
updated
Related Commands Command
telnet
Cisco MDS 9000 Family Command Reference
23-44
telnet server enable
no telnet server enable
Modification
This command was introduced.
Description
Logs in to a host that supports Telnet.
Chapter 23 T Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x