Show Controllers Cpu-Interface - Cisco Catalyst 3560-X Command Reference Manual

show controllers cpu-interface

show controllers cpu-interface
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Catalyst 3750-X and 3560-X Switch Command Reference
2-534
Downloaded from www.Manualslib.com
Use the show controllers cpu-interface privileged EXEC command to display the state of the CPU
network interface ASIC and the send and receive statistics for packets reaching the CPU.
show controllers cpu-interface [ | {begin | exclude | include} expression]
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
This is a partial output example from the show controllers cpu-interface command:
Switch# show controllers cpu-interface
cpu-queue-frames retrieved
----------------- ---------- ---------- ---------- ----------
rpc 4523063
stp 1545035
ipc 1903047
routing protocol 96145
L2 protocol 79596
remote console 0
sw forwarding 5756
host 225646
broadcast 46472
cbt-to-spt 0
igmp snooping 68411
icmp 0
logging 0
rpf-fail 0
queue14 0
cpu heartbeat 1710501
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
dropped invalid hol-block
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
OL-21522-02