Show Cts Capability Interface - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show cts capability interface

To display the Cisco TrustSec capability of all interfaces or a specific Ethernet interface, use the show cts
capability interface command.
show cts capability interface {all| ethernet}
Syntax Description
all
ethernet slot/port
Command Default
None
Command Modes
Any configuration mode
Command History
Release
6.2(2)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command does not require a license.
Examples This example shows how to display the Cisco TrustSec capability of all interfaces:
switch# show cts capability interface all
CTS capability information for interface(s)
--------- --- ------ ---------------------------------------
Interface SGT MacSec Comments
--------- --- ------ ---------------------------------------
Eth6/1
Eth8/1
Eth8/17
Eth8/33
Eth6/2
Eth8/2
Eth8/18
Eth8/34
Eth6/3
Eth8/3
Eth8/19
Eth8/35
Eth6/4
Eth8/4
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Yes Yes cts dot1x and manual configs allowed
Displays the Cisco TrustSec capability of all
interfaces.
Displays the Cisco TrustSec capability of the specific
interface.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show cts capability interface
733