Show Hostdos - Enterasys Matrix 2G4072-52 Configuration Manual

Firmware version 5.41.xx
Hide thumbs Also See for Matrix 2G4072-52:
Table of Contents

Advertisement

Security Configuration Command Set
Configuring Denial of Service (DoS) Prevention

14.3.14.1 show hostdos

Use this command to display Denial of Service security status and counters.
show hostdos
NOTE: When fragmented ICMP packets protection is enabled, the Ping of Death
counter will not be incremented. Ping of Death is a subset of the fragmented ICMP
function.
Syntax Description
None,
Command Type
Router command.
Command Mode
Global configuration: Matrix>Router1(config)#
Command Defaults
None.
Example
This example shows how to display Denial of Service security status and counters. For details on
how to set these parameters, refer to
Matrix>Router1(config)#show hostdos
LANDd Attack (Destination IP = Source IP)
Spoofed Address Check
IP packet with multicast/broadcast source address
Fragmented ICMP traffic
Large ICMP packet
Ping-of-Death attack
Port Scanning
14-184 Matrix DFE-Platinum and Diamond Series Configuration Guide
Section 14.3.14.2
Disabled
Disabled
Always enabled
0 attacks
Disabled
Disabled
Always enabled
0 attacks
Disabled
:

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Matrix dfe-platinum seriesMatrix dfe-diamond series

Table of Contents