Display Mpls Ldp Interface - 3Com S7906E Command Reference Manual

---------------------------------------------------------------
Instance ID
Instance Status
Hop Count Limit
Loop Detection
DU Re-advertise Timer
DU Explicit Request
Label Distribution Mode: Ordered
-----------------------------------------------------------------
Table 1-3 display mpls ldp command output description
Field
Protocol Version
Neighbor Liveness
Graceful Restart
FT Reconnect Timer
Recovery Timer
MTU Signaling
Instance ID
VPN-Instance
Hop Count Limit
Path Vector Limit
Loop Detection
DU Re-advertise Flag
DU Re-advertise Timer
Request Retry Flag
DU Explicit Request
Label Retention Mode
Label Distribution Mode

display mpls ldp interface

Syntax
display mpls ldp interface [ all [ verbose ] | [ vpn-instance vpn-instance-name ] [ interface-type
interface-number | verbose ] ] [ | { begin | exclude | include } regular-expression ]
View
Any view
: 0 VPN-Instance
: Active LSR ID
: 32 Path Vector Limit
: Off
: 30 Sec DU Re-advertise Flag : On
: Off Request Retry Flag
Label Retention Mode : Liberal
Version of the LDP protocol
Setting of the GR neighbor liveness timer
Whether GR is enabled
Setting of the GR's FT reconnect timer
Setting of the GR's recovery timer
Whether MTU signaling is supported. Currently, the device does
not support MTU signaling.
Sequence number of the LDP instance
Name of the LDP-enabled VPN instance. For the default instance,
nothing is displayed.
Maximum hop count
Maximum path vector length
Whether loop detection is enabled
Whether label readvertisement is enabled for DU mode
Label readvertisement timer for DU mode
Whether request retransmission is enabled
Whether explicit request transmission is enabled for DU mode
Label retention mode of the instance
Label distribution mode of the instance
1-5
:
: 1.1.1.1
: 32
: On
Description