Ixany_Flow_Control; Keep_Alive_Timer; Lat_Key; Lat_Queue_Max - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters Book C
ixany_flow_control
This asynchronous port parameter treats any input character as a start
(XON) character, if output has been suspended by a stop (XOFF)
character. A Y enables this parameter, an N disables it. The default
is N.

keep_alive_timer

This Annex parameter defines the number of seconds between the
transmission of identification packets during times of network inactivity.
This parameter works only for the LAT protocol. The packets serve only
as notices to remote nodes that the host's services are available. Allowable
values range from 10 to 255 (seconds). The default is 20 (seconds).

lat_key

This Annex parameter restricts access to LAT-related RA 6300
commands, parameters, functions, and the LAT protocol within the
RA 6300. Each RA 6300 requires a unique key value (contact your
supplier to obtain a LAT key). After setting the key, your system
administrator must reboot the RA 6300.

lat_queue_max

This Annex parameter limits the number of HIC requests that the
RA 6300 can queue. This parameter affects only the operation of HIC
requests received after changing the parameter's value and setting LAT.
Allowable values range from 1 to 255 or none (entering none sets the
value to 255). The default value is 4.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-66