Group_Value; Hardware_Tabs; Host_Table_Size; Image_Name - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters Book C

group_value

This Annex parameter specifies the LAT protocol remote group codes
that can access local services offered by an RA 6300. To access these
services, the RA 6300 must have at least one enabled group code that
matches the service's group codes. Valid options are all, none, a series of
numbers between 0 and 255 separated by commas, or a range of numbers
between 0 and 255 separated by dashes, followed by enabled or disabled.
The default is all disabled.

hardware_tabs

This asynchronous port parameter allows the RA 6300 to convert ASCII
tab characters to the correct number of spaces when a terminal does not
support hardware tabs. This occurs only at the CLI level. A Y enables
this parameter, an N disables it. The default is Y.

host_table_size

This Annex parameter defines the number of entries allowed in the host
table. Allowable values range from 0 to 255. Entering 255 allows an
unlimited number of entries; entering 254 indicates that there is no host
table. In this case, the RA 6300 requires a name server to resolve every
host name. The default is 64.

image_name

This Annex parameter defines the file name containing the operational
code that loads by default when you boot an RA 6300. The string size
ranges from 0 to 100 characters. The default is a null string ("").
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-56