Dedicated_Arguments; Default_Zone_List; Default_Session_Mode; Dhcp_Broadcast - Bay Networks 6300 Supplement Manual

Chapter 2 Configuration Parameters Book C

dedicated_arguments

This asynchronous port parameter defines the command line arguments
used for dedicated ports. The parameter accepts a 100-character string.
Use this parameter in conjunction with the mode (see mode on page 2-
73). The default is a null string ("").

default_zone_list

This Annex parameter contains the zone list that is sent to AppleTalk
clients in case of an ACP failure. The string size ranges from 1 to 100
characters. You must use spaces to separate zone names (e.g., general
engineering lab). To escape embedded spaces within a zone name, use
the backslash (\) character. If you do not set this parameter, the RA 6300
provides the network zone list. The default is a null string ("").

default_session_mode

This asynchronous port parameter defines the default session mode when
the VMS interface is configured (i.e., when cli_interface is set to vci).
Valid options are interactive, passthru, passall, or transparent. The
default is interactive.

dhcp_broadcast

This Annex parameter enables and disables the use of DHCP broadcast
messages; a DHCP proxy client will use it to determine if it can generate
DHCP broadcast messages as a means of "discovering" a DHCP server.
The options for the parameter are Y or N, N being the default (i.e., the
broadcast of DHCP messages is disabled). dhcp_broadcast functions
consistently with all other broadcast parameters defined in the system.
Remote Annex 6300 Supplement to the Remote Annex Administrator's Guide for UNIX
C-50