Panasonic FP7 Series Command Reference Manual page 634

13.7 OPHSAVE (Operation History Save to SD Card)
OPH0
├OpeHis0(180619_112345).csv
├OpeHis0(180619_113412).csv
└OpeHis0(180619_114630).csv
・・・
OPH7
├OpeHis7(180620_112345).csv
├・・・
└OpeHis7(180624_114630).csv
Output file directories are named for each group, as below.
\OPHx\ x: Group number
Output files are named as below.
OpeHisx(YYMMDD_HHMMSS).csv x: Group number
YYMMDD: File creation date (year/month/day)
HHMMSS: File creation time (hour/minute/second)
● The OPHSAVE instruction cannot be executed while the SD memory card access instruction
is being executed.
■
Flag operations
Name
SD memory card access
instruction in progress (SR3A)
SD memory card access
instruction execution completed
(SR3B)
SD memory card access
instruction execution result
(SR3C)
SR7
SR8
(ER)
13-12
Description
Turns ON when instruction execution starts. Turns OFF when instruction
execution is complete.
Turns OFF when instruction execution starts. Turns ON when instruction
execution is complete.
Indicates the execution results when instruction execution is complete.
Normal end = 0, abnormal end = 1
The flag is set when an out-of-range value is specified for S1.
The flag is set when an out-of-range value is specified for S2.
The flag is set when an out-of-range value is specified for S3.
The flag is set when an out-of-range value is specified for S4.
The flag is set when a group without registered operation histories is
specified.
To be set in case of out-of-range values in indirect access (index
modification).
WUME-FP7CPUPGR-12