Panasonic FP7 Series Command Reference Manual page 999

● A part of parameters can be omitted. The settings are not changed when parameters are
omitted partially.
● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● When "NOUSE" or "KEEP" is specified instead of parameters, the instruction operates
according to the table of special keywords.
● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting item Settings
SMTP
authentication
method
(Essential)
S2
Account
(Can be omitted)
Password
(Can be omitted)
(Note 1) Input an SMTP authentication method, an account, and a password separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the authentication setting parameters in the order of the above table.
Setting example
Exam
S2 "CRAM,ACCOUNT=sunx,PASS=control"
ple 1
Settings SMTP authentication method: CRAM-MD5, Account: sunx, Password: control
Exam
S2 "PLAIN2,ACCOUNT=FP0R,PASS=small"
ple 2
Settings SMTP authentication method: PLAIN2, Account: FP0R, Password: small
Exam
S2 "LOGIN,ACCOUNT=FP2SH,PASS=middle"
ple 3
Settings SMTP authentication method: LOGIN, Account: FP2SH, Password: middle
■
Operand [S2]: account name and password setting
Patterns
Account is specified. : Password is deleted.
Account is deleted. : Password is specified.
Account is deleted. : Password is deleted.
Account is specified. : Password is not changed.
Account is not changed. : Password is specified.
WUME-FP7CPUPGR-12
17.22 SMTPcSV (Mail Server Setting)
Specify SMTP authentication method.
CRAM: CRAM-MD5 is used.
PLAIN1: PLAIN1 (ID/PASS) is used.
PLAIN2: PLAIN2 (ID/PASS) is used.
LOGIN: LOGIN is used.
Specify an account.
ACCOUNT=XXX (Default: root)
Specify a password.
Specify the keyword "PASS=" at the beginning.
PASS=XXX (Default: root)
How to specify
"CRAM,ACCOUNT=xxx,PASS="
"PLAIN1,ACCOUNT=,PASS=xxx"
"PLAIN2,ACCOUNT=,PASS="
"LOGIN,ACCOUNT=xxx"
"CRAM,,PASS=xxx"
Setting
range
Maximum 32
one-byte
characters
Maximum 32
one-byte
characters
17-111