Panasonic FP7 Series Command Reference Manual page 1039

17.29 EIPNDST (EtherNet/IP Node Status Acquisition Instruction)
SR13
X6B
( DF )
SR14
R1
R1
DT2000
The initial preset is required to acquire the execution result of the EIPNDST instruction.
■
Flag operations
Name
SR7
SR8
(ER)
WUME-FP7CPUPGR-12
EIPNDST
=, US U0
Description
To be set when the unit specified by UNITSEL is not the built-in ET-LAN.
To be set when the EtherNet/IP function is set to Not Use in the Ethernet unit configuration.
To be set in case of out-of-range values in indirect access (index modification).
Set when executed in an interrupt program.
To be set when the node specified by [S] does not exist.
To be set when the 3-word device area that starts from the device that is specified by [D2]
cannot be allocated.
MV.US HFFFF
S1
UNITSEL U100
S1
<
U1 DT100
S D1
Process when completed
successfully
<
EIPNDST instruction
DT2000
Execution result code preset
S2
Communication port settings
U1
S1: CPU with built-in
S2
ET-LAN (U100)
R1 S2: Connection 1 (U1)
SET >
Node status acquisition
S: Node number (U1)
DT2000
D1: Storage location (DT100)
D2: Execution result code
D2
(DT2000)
Execution result confirmation
When DT2000 equals 0,
R1
completed successfully
>
RST
17-151