Pmset / Ppmset (Change Of Mewnet-W Parameters) - Panasonic FP7 Series Command Reference Manual

16.6 PMSET / pPMSET (Change of MEWNET-W Parameters)

16.6 PMSET / pPMSET (Change of MEWNET-W Parameters)
■
Ladder diagram
(Note 1) The above figure shows the case that the FP7 multi-wire link unit for S1=U1 (slot number 1) is
specified by the UNITSEL instruction.
■
List of operands
Operand Description
S Start of the area that stores data to be set as communication parameters
n
Specified number of words (Setting range: 10 or 1)
D Starting address of the device area in the master unit that stores the processing result (1 word)
(Note 1) When the station number is 17 or more, specify 1.
■
Available devices (●: Available)
Operan
d
W W
X Y
S ● ●
n ● ●
D ● ●
■
Outline of operation
● The MEWNET-W communication parameters of the FP7 multi-wire link unit are changed with
a user program.
● Set communication parameters to be changed within [n] words from the area starting with
[S], and execute the PMSET/pPMSET instruction, to issue the setting change request to the
unit.
● By reading setting parameters using the PMGET instruction, and setting parameters to be
changed using the PMSET/pPMSET instruction, the settings can be simplified.
16-20
16-Bit device:
W W W S D L
R L S D T D
● ● ● ●
● ● ● ●
● ● ● ●
(Note 1)
32-Bit
device:
TS TE
U W
WI IX
C C
M O
S E
Real St
Integer numbe rin
r g
D
K H SF " "
Ｕ
F
●
WUME-FP7CPUPGR-12
Index
modifie
r
●
●
●