Panasonic FP7 Series Command Reference Manual page 691

Hide thumbs Also See for FP7 Series:

Table of Contents

[S1]..."%10.7b"

③ Conversion data amount = 2

DT0 to DT1: H 0000 0123 → DT100 to DT104: "

DT2 to DT3: H 0012 3456 → DT105 to DT109: "

Example 11) Converting 32-bit single-precision floating point real number data (2

data) to floating point ASCII data (8 digits x 2)

The high byte of DT100 is set as the beginning of the storage area. It is stored right-aligned

(high word side). A decimal point is added followed by no digit.

[S1]..."%#8.0f"

③ Conversion data amount = 2

DT0 to DT3: 123.4567

DT4 to DT7: -12.34567

WUME-FP7CPUPGR-12

Convert 32-bit BCD data into decimal ASCII data (10 digits)

① ASCII data (reverse direction)

② Storage start position (0)

③ Conversion data amount (2)

Convert 32-bit single precision real number data into floating point ASCII data (8 digits)

① ASCII data (reverse direction)

② Storage start position (1)

③ Conversion data amount (2)

→ DT100 to DT104: "

→ DT104 to DT108: "

14.9 BTOA (Conversion: BIN → ASCII)

Convert [S2] and [S2]+2

② Storage start position = +0 bytes

Convert [S2] and [S2]+2

② Storage start position = +1 bytes

(characters)

(characters)