Conset (User Connection Setting) - Panasonic FP7 Series Command Reference Manual

17.6 CONSET (User Connection Setting)

17.6 CONSET (User Connection Setting)
■
Ladder diagram
(Note 1) The above figure shows the case that S1=U100 (built-in ET-LAN in the CPU unit) and S2=U1
(connection number 1) are specified by the UNITSEL instruction.
(Note 2) By copying and pasting the following text in the instruction list box of FPWIN GR7, the operand part of
the above program can be input.
CONSET "GP,OPTNAV,SV,AUTO,UDP" "PORT=9000,DISCONT=0" U1 U16
■
List of operands
Operand Description
Starting address of the device area that stores the string data that indicates the parameters for
S1
operation setting, or a character constant.
Starting address of the device area that stores the string data that indicates the parameters for port
S2
setting, or a character constant.
D1 Device address where the setting start connection number is stored, or a constant
D2 Device address where the setting end connection number is stored, or a constant
■
Devices that can be specified (indicated by ●)
Operan
d
W W
X Y
S1 ● ●
S2 ● ●
D1 ● ●
D2 ● ●
■
Outline of operation
● This instruction sets the connection setting parameters that are specified by [S1] and [S2],
for the connections which are in the range specified by [D1] and [D2].
17-32
16-Bit device:
W W W S D L
R L S D T D
● ● ● ●
● ● ● ●
● ● ● ●
● ● ● ●
32-Bit
device:
TS TE
U W
WI IX
C C
M O
S E
Real St
Integer numbe rin
r g
D
K H SF " "
Ｕ
F
●
●
● ●
● ●
WUME-FP7CPUPGR-12
Index
modifie
r
●
●