Panasonic FP7 Series Command Reference Manual page 1059

■
Precautions for programming
● With this instruction, delimitation of the CIP message data cannot be checked. Therefore,
operation continues without detecting an error even an illegal offset position is specified.
Fully grasp the content of a received CIP message, and then set the offset position and data
size.
● Even if the acquisition source (S1) range overlaps with the storage location (D2) range, data
is acquired without causing any error.
WUME-FP7CPUPGR-12
17.34 CIPMGET (CIP Message Data Getting)
17-171