Panasonic FP7 Series Command Reference Manual page 659

Hide thumbs Also See for FP7 Series:

Table of Contents

Example 3) Operation unit: 16 bits (SS) / Calculation method: CRC-16; Initial value =

0000H; Right shift; XOR = 0000H

[S2] Header of target data

[S3] Length of target data (12 bytes)

Example 4) Operation unit: 16 bits (US) / Calculation method: CRCITT; Initial value =

FFFFH; Left shift; XOR = 0000H

[S2] Header of target data

[S3] Length of target data (12 bytes)

Flag operations

WUME-FP7CPUPGR-12

Calculation result

(Characters)

Calculation result

(Characters)

To be set in case of out-of-range values in indirect access (index modification).

To be set in the case that the length of the target data for [S3] is 0.

To be set in the case that the control data specified by [S1] is out of the specified range.

To be set when [S2 + calculation starting position + S3] exceeds the [S2] area.

To be set when the address specified by [D + storage starting position] exceeds the [D] area.

14.2 CRC (CRC Code Calculation)

(Characters)

(Characters)