Panasonic FP7 Series Command Reference Manual page 882

Cpu unit
Hide thumbs Also See for FP7 Series:
Table of Contents

Advertisement

16.6 PMSET / pPMSET (Change of MEWNET-W Parameters)
Operand
Parameter
Link relay transmission
[S+6]
start number
Link relay transmission
[S+7]
size
Link register
[S+8]
transmission start
number
Link register
[S+9]
transmission size
Content of the processing result [D]
● Execution results are stored in the area of one word.
● The execution result code in the low byte is valid when the process in-progress flag of bit 15
is zero.
● If an error occurs, the execution result flag (bit 14) is turned ON. The description of the error
is stored in the execution result code (bits 0 to 7).
Process in-progress flag
0: Process done
1: In-progress
Execution result flag
0: Normal completion
1: Abnormal completion
Flag operations
Name
SR7
SR8
(ER)
● For details of sample programs, refer to
Parameters)".
16-22
Range
U0 to U63
U0 to U64
U0 to U127
U1 - U127
Bit no. 15
0 0 0 0 0 0
Description
To be set in the case of out-of-range in indirect access (index modification, pointer access).
To be set when the FP7 multi-wire link unit does not exist in the slot that is specified by
UNITSEL.
To be set when the device specified by [S] is out of the range.
To be set when the number of words specified by [n] is out of the available range.
To be set when the instruction is executed in an interrupt program and the FP7 multi-wire
link unit is the target.
Settings
Link relay transmission start number
Link relay transmission size
Link register transmission start number
As for the link register transmission size, up to 127
words can be sent.
8 7
0
Execution result code
0: Normal completion
1: The communication port specified by UNITSEL instruction
is invalid
2: Setting error
3: Mode change error
4: Communication port occupied
5: Change request parameter inconsistency (At the start/end
of the setting process, parameters specified by operands
are inconsistent)
7: Unit number setting on the front panel of the multi-wire link
unit (When the switch is not 0)
"16.7 PMSET / pPMSET (Change of MEWNET-W2
WUME-FP7CPUPGR-12

Advertisement

Table of Contents
loading

Table of Contents