Panasonic FP7 Series Command Reference Manual page 998
Cpu unit
Hide thumbs
Also See for FP7 Series:
- User manual (275 pages) ,
- Additional functions manual (45 pages) ,
- User manual (34 pages)
Table of Contents
Advertisement
17.22 SMTPcSV (Mail Server Setting)
Setting
Settings
item
Source name (can be
omitted)
Source e-mail address
(essential)
IP address or host name of
mail server (essential)
S1
Port number (can be
omitted)
SSL3/TLS1 Authentication
(Can be omitted)
(Note 1)
Input a source name, a source e-mail address, the IP address or the host name of a mail server, a port
number, and the SSL3/TLS1 authentication setting separated by a comma ",".
(Note 2)
Both upper and lower cases can be used for specifying keywords.
(Note 3)
Specify the sender information in the order of the above table.
Setting example
Exam
S1
"NAME=FP7_001,FROM=pana@pana.com,IPv4=192.255.2.10,PORT=25,SSL"
ple 1
Source name: FP7_001, source e-mail address: pana@pana.com
Settings
IP address: 192.255.2.10, Port number: 25, SSL3/TLS1 authentication: Use
Exam
S1
",FROM=sunx@sunx.com,IPv6=1111:1222::a8dd:0:0:6666,PORT=100,SSL"
ple 2
Source name: Not change, Source e-mail address: sunx@sunx.com
Settings
IP address: 1111:1222::a8dd:0:0:6666, Port number: 100, SSL3/TLS1 authentication: Use
Exam
"NAME=FP7_002,FROM=pewsunx@pewsunx.com,HOST=SMTPmailserver.com,
S1
ple 3
PORT=1000,NON"
Source name: FP7_002, Source e-mail address: pewsunx@pewsunx.com
Settings
Host name: SMTPmailserver.com, Port number: 1000, SSL3/TLS1 authentication: Not use
Exam
S1
"NAME=FP7_002,FROM=pewsunx@pewsunx.com,HOST=SMTPmailserver.com"
ple 4
Source name: FP7_002, Source e-mail address: pewsunx@pewsunx.com
Settings
Host name: SMTPmailserver.com, Port number: Not change, SSL3/TLS1 authentication: Not
change
■
Operand [S2] setting
● Specify the starting address of the device area that stores the string data that indicates the
authentication setting parameters, or a character constant.
17-110
Specify a source name. Specify the keyword "NAME=" at the
beginning.
Specify a source e-mail address. Specify the keyword "FROM=" at
the beginning.
Specify IP address or host name.
For an IP address, specify the keyword "IPv4=" or "IPv6=" at the
beginning. For a host name, specify "HOST=".
● For IPv4: IPv4 = 111.122.133.144
● For Ipv6: IPv6 = 1111:122:2:1555:0:0:1888
* For details of the range of IPv4 addresses that can be
specified, refer to
"19.10 Ethernet Function: IP
address setting specifications".
● For a host name: HOST=smtp.pidsx.com
Specify port number. (Default = 25)
Setting range: 1 to 65535
Specify whether or not to use SSL3/TLS1 authentication.
SSL= Use SSL3/TLS1
NON=Not use
Addresses""IP
WUME-FP7CPUPGR-12
Advertisement
Table of Contents
