Panasonic FP7 Series Command Reference Manual page 858

15.9 PMGET (Acquiring SCU Parameters)
(Note 1) The storage destinations shown above are for station number 1. 12 words are assigned to each
station and are stored in a 192-word area in order starting from the information for station number 1. In
addition, they occupy the 192-word area.
Link area block number
PLC link W0 maximum
station number
Range of link relays
Range of link registers
Link relay sending start
number
Size of link relay send
area
Link register sending start
number
Size of link register send
area
Reserved for system
■
Flag operations
Name
SR7
SR8
(ER)
15-64
Items
Station No. 1
[D]
[D+1]
[D+2]
[D+3]
[D+4]
[D+5]
[D+6]
[D+7]
[D+8] to [D
+11]
Description
Out-of-range in indirect access (index modification)
Destination range is out of the accessible range.
SCU unit does not exist in the slot specified by UNITSEL.
COM port specified by UNITSEL does not exist.
The parameter storage device specified by [D] is invalid.
PLC link station No. and storage destination
Station No. 2 ----- Station No. 15 Station No. 16
[D+12] ----- [D+168]
[D+13] ----- [D+169]
[D+14] ----- [D+170]
[D+15] ----- [D+171]
[D+16] ----- [D+172]
[D+17] ----- [D+173]
[D+18] ----- [D+174]
[D+19] ----- [D+175]
[D+20] to [D
-----
+23]
[D+180]
[D+181]
[D+182]
[D+183]
[D+184]
[D+185]
[D+186]
[D+187]
[D+176] to [D [D+188] to [D
+179] +191]
WUME-FP7CPUPGR-12