Panasonic FP7 Series Command Reference Manual page 944

17.11 FTPcSV (FTP Client Connected Server Setting)
Settings User name: Delete, Password: Delete
Exam
S2 "USER=root"
ple 4
Settings User name: root, Password: Not change
Exam
S2 ",PASS=SUNX"
ple 5
Settings User name: Not change, Password: SUNX
■
Special keyword of operand [S2] setting
Special keyword
INITIAL
KEEP
Setting example
Exam
S2 "INITIAL"
ple 1
Settings User name: root, Password: root
Exam
S2 "KEEP"
ple 2
Settings User name: Not change, Password: Not change
■
Operand [S3] setting
● Specify the starting address of the device area that stores the string data that indicates
parameters, or a character constant.
● A part of parameters can be omitted. The settings are not changed when parameters are
omitted partially.
● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● When "INITIAL" or "KEEP" is specified instead of parameters, the instruction operates
according to the table of special keywords.
● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting
Settings
item
Timeout period
(Can be omitted)
No. of retries
S3
(Can be omitted)
Retry interval
(Can be omitted)
(Note 1) Input a timeout period, number of retries and retry interval separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the detailed setting parameters in the order of the above table.
17-56
Description
Set an initial value.
The current setting is not changed.
Specify a timeout period.
TOUT=: Time setting (Default: 60 seconds)
Specify the number of retries.
RTRY=: Number of retries (Default: 3 times)
Specify the retry interval.
RTTM=: Retry interval (Default: 600 seconds)
(Note 4)
Setting range
30 to 300
seconds
0 to 3
10 to 86400
seconds
WUME-FP7CPUPGR-12