Panasonic FP7 Series Command Reference Manual page 922

17.6 CONSET (User Connection Setting)
■
Operand [S1] setting
● Specify the starting address of the device area that stores the string data that indicates the
parameters for operation setting, or a character constant.
● When "INITIAL" is specified instead of parameters, the instruction operates according to the
table of special keywords.
Setting
Settings
item
Operation mode
setting
(Essential)
S1
Option settings
(Essential)
Open method
setting
Server/Client
(Essential)
Open method
setting
Auto/Manual
17-34
Specify operation mode.
MEWCOM Specifies MEWTOCOL-COM
MEW7COM Specifies MEWTOCOL-7
MODBUS Specifies MODBUS-TCP
MEWDAT Specifies MEWTOCOL-DAT
MC3EBIN Specifies the MC protocol (3E BINARY)
GP Specifies general-purpose communication
Specifies general-purpose communication (with large capacity
GP_LARGE
reception)
* An operation error occurs when GT is specified for the 17th or later user
connections.
* An operation error occurs when GP_LARGE is specified for the second or later
user connections.
Specify protocol options. Available options differ according to operation modes.
OPTAV: Option available; OPTNAV: Option not available
Operation mode select
MEWTOCOL-COM
MEWTOCOL7-COM
MODBUS-TCP
MEWTOCOL-DAT
MC protocol (3E BINARY) Not available
General-purpose
communication
General-purpose
communication (with large
capacity reception)
* An operation error occurs if OPTNAV is specified when GP_LARGE is specified
for the operation mode setting.
Specify open method (Server/Client).
CL: Client connection, SV: Server connection (any partner)
Specify open method (Auto/Manual).
AUTO: Open automatically
MANU: Not open automatically (Open with open instruction)
OPTAV
Connect with FP2 ET-
LAN
Not available
Not available
Connect with FP2 ET-
LAN
Not append a special
header
Not append a special
header
OPTNAV
Not connect
-
-
Not connect
Append a special header
Cannot specify
WUME-FP7CPUPGR-12