Panasonic FP7 Series Command Reference Manual page 855

Storage
Items
location
Number of
[D+3] occurrences of
reception error
[D+4] Setting error code
Error parameter
[D+5]
number
Modem initialization
[D+6]
status
■
Acquired data (PLC link status flag information): When [S] = 2
Storage
locatio Items
n
[D] Master unit number
[D+1] Error flag 1
[D+2] Error flag 2
WUME-FP7CPUPGR-12
15.9 PMGET (Acquiring SCU Parameters)
Range: Description
Bit 15 to 10: 0 (fixed)
U0 to
The number of times reception errors were detected is stored.
U65535
The bits corresponding to when an error occurs turn ON. (0:
Normal, 1: Error)
Bit 0: Mode setting/change abnormality (A mode number that
cannot be set or changed is specified)
-
Bit 7 to 1: 0 (fixed)
Bit 8: Communication parameters setting error
Bit 9: Sent data amount abnormality
Bit 15 to 10: 0 (fixed)
Parameter number which data outside the range is specified
U1 to U12 (Effective only when the communication parameter setting error
occurs.)
No operation
H0000
During initialization
H0100
Initialization succeeded (When modem initialization is completed,
H0200 the operation mode automatically returns to its original state.)
H02FF Initialization failed (When modem initialization is completed, the
operation mode automatically returns to its original state.)
Range: Description
U1 to U999
MEWTOCOL-COM: U1 to U99
U1 to U999 MEWTOCOL7-COM: U1 to U999
MODBUS-RTU: U1 to U247
PLC link: U1 to U16 (Default: 0)
Bit 0: Transmission error (0 = Normal, 1 = Transmission error)
Bit 1: Station number overlap (0 = Normal, 1 = Error)
Bit 2: Area overlap (0 = Normal, 1 = Error)
Bit 3: Link error (0 = Normal, 1 = Error)
H0000 to Bit 4: Maximum station number inconsistency (0 = Normal, 1
H00DF = Error)
Bit 5: Fixed to 0
Bit 6: Link stop (0 = Operating, 1 = Stop status)
Bit 7: Initializing (0 = Regular, 1 = Initializing)
Bit 15 to 8: Not used
Bit 0: Lost token (0 = Normal, 1 = Error)
Bit 1: Duplicate token (0 = Normal, 1 = Error)
Bit 2: Lost signal (0 = Normal, 1 = Error)
H0000 to
H00FF
Bit 3: Reception of undefined command
Bit 4: BCC error (0 = Normal, 1 = Error)
Bit 5: Received data format error (0 = Normal, 1 = Error)
15-61