Panasonic FP7 Series Command Reference Manual page 668

Hide thumbs Also See for FP7 Series:

Table of Contents

14.5 BCDA (Conversion: BCD → Decimal ASCII)

Example 4) Operation unit: 32 bits (UL)

Precautions for programming

● The two characters that comprise 1 byte are stored in the opposite order following

● Converts two bytes as one section.

[Forward direction]

[Reverse direction]

Flag operations

To be set in the case of out-of-range in indirect access (index modification).

To be set when the data specified by [S1] contain non-BCD data.

To be set when the number of bytes specified by [S2] exceeds the [S1] area.

To be set when the conversion result exceeds the area.

To be set when [S2] is specified as '0'.

To be set when the conversion direction of [S2] is out of the range.

To be set when the conversion data size of [S2] is out of the range.

Reverse direction, four bytes

(characters)

WUME-FP7CPUPGR-12