Panasonic FP7 Series Command Reference Manual page 1048

Hide thumbs Also See for FP7 Series:

Table of Contents

17.32 EIPMSEND (EIP Message Send)

Example of processing

Example) Performing message communication using the connection 1 of the built-in ET-LAN in

the CPU unit

● During the configuration setting, it is necessary to set the built-in ET-LAN connection and the

EIP scan list.

● The slot number for the built-in ET-LAN needs to be specified to be "100".

1. First, using the UNITSEL instruction, specify "100" as the slop number for the built-in ET-

LAN (S1 = U100), and user connection 1 (S2 = U1).

UNITSEL U100 U1

2. Set the destination data using the EIPMSATT instruction.

EIPMSATT DT100

3. Create a value to be set in the message body data using the CIPMSET instruction.

CIPMSET DT200

4. Set the message body data using the EIPMBODY instruction.

EIPMBODY DT500

5. Perform message communication using the EIPMSEND instruction. Received data is

stored in D1 and execution results are stored in D2.

EIPMSEND DT1000 DT2000

Results produced when message communication is completed normally

U6 (No. of bytes)

Execution result

Received data size

Received data

WUME-FP7CPUPGR-12