Filtr (Time Constant Processing) - Panasonic FP7 Series Command Reference Manual

10.18 FILTR (Time Constant Processing)

■
Ladder diagram
■
List of operands
Operand Description
S1 Filtering targeted data (device address)
S2 Filtering targeted bit (device address or constant) (data available range: H0000 to HFFFF)
S3 Filtering time (device address or constant) (data available range: 0 to 30000, in ms)
D Filtering result (device address)
■
Available devices (●: Available)
Operan
d
W W
X Y
S1 ● ●
S2 ● ●
S3 ● ●
D ● ●
(Note 1) Only 16-bit devices, 32-bit devices, and integer constants can be modified. (Real number constants,
and character constants cannot be specified.)
■
Outline of operation
● Among data specified by [S1], bits specified by [S2] with the value 0 are directly output, and
those with the value 1 are filtered and output.
● Filtering is carried out for the targeted bits within the time specified by [S3] (in 0 to 30000
ms). The result is output to the area specified by [D].
● When the execution condition is switched on, all input bits specified by [S1] are directly
output without conditions.
● It is possible that a delay of up to one scan may be caused in the filtering time.
■
Processing
Among targeted data, specified bits with the value 0 are directly output, and those with the
value 1 are filtered and output. Filtering is carried out within the specified time and the result is
output.
WUME-FP7CPUPGR-12
16-Bit device:
W W W S D L
R L S D T D
● ● ● ●
● ● ● ●
● ● ● ●
● ● ● ●
10.18 FILTR (Time Constant Processing)
32-Bit
device:
TS TE
U W
WI IX
C C
M O
S E
Real St
Integer numbe rin
r g
D
K H SF " "
Ｕ
F
● ●
● ●
Index
modifie
r
(Note 1)
●
●
●
●
10-67