Panasonic FP7 Series Command Reference Manual page 636

13.8 ERR (Self-Diagnostic Error Code Set)
[n]
U0
● When self-diagnostic errors are cleared, the following system relays (SR), system data (SD),
and system monitors (SM) are also cleared at the same time.
Device No.
SR0
SR2
SR3
SR4
SR7
SR8
SR22
SR23
SR24
SR25
SR26
Device No.
SD0
SD2
SD3
SD4
SD7
SD8
SD9
SD10
SD11
SD12
■
Flag operations
Name
SR7
SR8
(ER)
13-14
Operation
Self-diagnostic errors are cleared. The system relays (SR), system data (SD),
and system monitors (SM) that are shown below are also cleared at the same
time.
Application
Operation error detection (Latest)
Unit error occurrence
Unit warning occurrence
Unit verification error occurrence
Operation error detection (Hold)
Operation error detection (Latest)
RTC data error
Power supply unit service lifetime warning
RTC backup battery voltage drop hold
RTC backup battery voltage drop real
SNTP time update fail
Application
Self-diagnostic error code
Error occurrence slot number
Warning occurrence slot number
Verify error occurrence slot number
Hold operation error occurrence address (PB number)
Hold operation error occurrence address (32-bit lower address)
Hold operation error occurrence address (32-bit upper address)
Latest operation error occurrence address (PB number)
Latest operation error occurrence address (32-bit lower address)
Latest operation error occurrence address (32-bit upper address)
Description
To be set when the error code [n] is out of the range.
WUME-FP7CPUPGR-12