Panasonic FP7 Series Command Reference Manual page 152

3.18 TM16 (16-bit Timer)
TM16 instruction (When specifying operand S=constant)
U100 is set in the setting value area TS0 when compiling the program. The setting value area
TS0 is set in the elapsed value area TE0 when the input of R0 rises. The setting range of a
constant is U0 to U65535.
● When a 32-bit value is written into the elapsed value area TE while the timer is being operated
using an instruction such as MV instruction, the timer operates with the written 32-bit value.
When a 32-bit value is written into the setting value area TS, the timer operates with the written
32-bit value.
3-48 WUME-FP7CPUPGR-12