Panasonic FP7 Series Command Reference Manual page 222

3.39 INTPG (Unit Interruption Program Start), IRET (Unit Interruption Program
End)
Comparison match
flag of unit
CH1 Comparison
match 0 flag
CH1 Comparison
match 1 flag
CH2 Comparison
match 0 flag
CH2 Comparison
match 1 flag
CH3 Comparison
match 0 flag
CH3 Comparison
match 1 flag
(Note 1) Interruption program numbers are specified with slot numbers + (0 to 7). The numbers in the above
table are for the slot 1.
Example) The interruption program number corresponding to the CH1 comparison match 1 flag of the
slot number 10 is INTPG103.
■
Interrupt program execution
● Executes the interruption program of a corresponding number when interruption occurs.
Main program process
INT program process
INT input
● When interruption is disabled, the interruption program will be executed by enabling it by the
CPU unit interruption enable instruction "EI" and the unit interruption enable/disable
instruction "IMASK".
Main program process
INT program process
INT input
● If another interruption program is being executed, executes it after the completion of the
running program.
3-118
Corresponding interruption program No.
Slot 1 Slot 2
INTPG 12 INTPG 22
INTPG 13 INTPG 23
INTPG 14 INTPG 24
INTPG 15 INTPG 25
INTPG 16 INTPG 26
INTPG 17 INTPG 27
Slot 3 -----
INTPG 32 -----
INTPG 33 -----
INTPG 34 -----
INTPG 35 -----
INTPG 36 -----
INTPG 37 -----
Enable
----- Slot 15
----- INTPG 152 INTPG 162
----- INTPG 153 INTPG 163
----- INTPG 154 INTPG 164
----- INTPG 155 INTPG 165
----- INTPG 156 INTPG 166
----- INTPG 157 INTPG 167
WUME-FP7CPUPGR-12
Slot 16