Panasonic FP7 Series Command Reference Manual page 421

Hide thumbs Also See for FP7 Series:

Table of Contents

Example of data table shift-out and compress when DT10, DT17 and DT20 are respectively specified

for [D1], [D2] and [D3].

1. The write data are transferred to the buffer start. (The starting data are overwritten.)

2. The data are compressed in the range from buffer start to buffer end.

Example) Operation unit: 16 bits (US, SS) (executed twice)

[D1]...DT0 [D2]...DT7

First execution

① Write data move

Precautions during programming

● In the case of a direct address and index modification address, specify the same device for

[D1] and [D2]. At the same time, specify [D2] to be greater than or equal to [D1].

Flag operations

WUME-FP7CPUPGR-12

8.16 CMPW (Data Table Shift-In and Compress)

To be set in the case of out-of-range in indirect access (index modification).

To be set when [D1] is larger than [D2].

Second execution

① Write data move