Panasonic FP7 Series Command Reference Manual page 979

■
Operand [S3] setting (DOWNLOAD operation for a device)
● Specify the starting address of the device area that stores the string data that indicates
destination device settings, or a character constant.
Setting
Settings
item
Destination
device setting
S3
Number of
transferred data
(number of
bytes)
(Note 1) Input each setting parameter for the destination device setting separated by a comma ",".
(Note 2) Specify the operation setting parameters in the order of the above table.
Setting example
Exam
S3 "WX16,32"
ple 1
Device setting, Device division: Global, Device code: WX, Device number: 16, Number of bytes:
Settings
32 bytes
Exam
S3 "DT123456,250"
ple 2
Device setting, Device division: Global, Device code: DT, Device number: 123456, Number of
Settings
bytes: 250 bytes
Exam
S3 "WR0,64"
ple 3
Device setting, Device division: Global, Device code: WR, Device number: 0, Number of bytes: 64
Settings
bytes
Exam
S3 "WL10,128"
ple 4
Device setting, Device division: Global, Device code: WL, Device number: 10, Number of bytes:
Settings
128 bytes
WUME-FP7CPUPGR-12
17.17 HTTPcSET (HTTP Client Transfer Setting)
Specify the destination device setting.
● Global devices
Specify device code + device number.
● Local devices
"PB" + PB number + "_" (underscore) + device code + device
number
Devices that can be specified
Global devices
WX
WY
WR
WL
DT
LD
Specify the number of transferred data (number of bytes). (1 to 7
digits)
* The number of bytes that can be simultaneously transferred is 1
MB for all 16 IDs.
Local devices
WX
WY
WR
WL
DT
LD
Setting
range
1 to
1048576
(1MB)
17-91