Panasonic FP7 Series Command Reference Manual page 1005

■
Operand [S2] setting
● Specify the starting address of the device area that stores the string data that indicates a
destination group name, or a character constant.
Setting item Settings
Destination group
S2
name
(Note 1) Upper and lower case characters can be used for specifying keywords.
Setting example
Exam
S2 "GRPNAME=Grp0"
ple 1
Settings Group name: Grp0
Exam
S2 "GrpName=Grp1"
ple 2
Settings Group name: Grp1
■
Operand [S3] setting
● Specify the starting address of the device area that stores the string data that indicates a
destination address, or a character constant.
Setting item Settings
Destination
address
S3
(Host name)
(Note 1) The destination address of S3 can be specified with a host name only or host name and domain
name.
(Note 2) When a domain name is omitted, the destination address is created by the addition of the domain
name of S4.
(Note 3) Multiple addresses can be specified by separating each address with ",".
(Note 4) Upper and lower case characters can be used for specifying keywords.
Setting example
Exam
S3 "TO=suzuki@sunx.co.jp"
ple 1
Destination address: suzuki@sunx.co.jp,
Settings
Domain name: Specified for [S3]
Exam
S3 "TO=sato"
ple 2
Destination address: sato@sunx.co.jp,
Settings
Domain name: Omitted for [S3], specified as "DOMAIN=sunx.co.jp" for [S4].
Exam
S3 "TO=suzuki@sunx.co.jp,yamamoto@pana.co.jp"
ple 3
Destination address: Multiple addresses (suzuki@sunx.co.jp and yamamoto@pana.co.jp) are
Settings
specified,
WUME-FP7CPUPGR-12
17.23 SMTPcADD (Destination Group Setting)
Specify a destination group name.
Specify the keyword "GRPNAME=" at the beginning.
GRPNAME=Destination group name
Specify a destination address (host name). Specify the keyword "TO=" at the
beginning.
TO=Destination address
Setting
range
Maximum 64
one-byte
characters
17-117