Panasonic FP7 Series Command Reference Manual page 908

17.3 ETSTAT (Acquiring Ethernet Unit Information: FTP/HTTP/SMTP)
Code Name
5 Transfer disabled error
6 Transfer canceled error
7 Transfer failed error
Data decompression
8
error (write)
Data decompression
9
error (read)
10 File delete error
■
List of transfer done codes (FTP error codes)
Error code Description
226 Normal end
It is not possible to provide services. Ends control connection. At the time of the shutdown of
421
server.
425 It is not possible to open data connection.
426 Connection was closed and data transfer was canceled for some reason.
450 It is not possible to execute the request for any reason of access authority or file system.
451 Processing was canceled due to a local error.
452 It is not possible to execute due to any problem in disk capacity.
500 Syntax error of commands
501 Syntax error of arguments or parameters
502 Command is not implemented.
503 The order of using commands is wrong.
504 Arguments or parameters are not implemented.
530 User could not log in.
532 Charging information must be confirmed with ACCT command for file transmission.
550 It is not possible to execute the request for any reason of access authority or file system.
551 It is not possible to execute because of a problem in the type of page structure.
552 It is not possible to execute due to any problem in disk capacity.
553 it is not possible to execute due to an incorrect file name.
1XXX An error occurred during file deletion after transfer (not to be retried).
9XX Client service error
■
List of transfer done codes (HTTP error codes)
Error code Description
2XX Normal end
17-20
Description
To be set when the transfer disable relay is "1=Transfer disabled" for the
transfer number that is specified during the execution of a transfer request
instruction.
To be set when the transfer cancel request relay is changed from "0" to "1"
(the leading edge OFF to ON) which means a request to cancel.
To be set when the transfer done relay is "1=Transfer done" and the
transfer failure relay is "1=Transfer failed".
To be set when an error occurs during decompression of data for
registration to a client.
To be set when an error occurs during acquisition of data from a client.
To be set when file deletion after transfer is specified but the file cannot be
deleted.
WUME-FP7CPUPGR-12