Panasonic FP7 Series Command Reference Manual page 1020

17.25 SMTPcLOG (Logging/Trace Mail Setting)
Setting
Settings
item
Destination
group
number
S2
Subject
(Note 1) Input each setting parameter for a subject and destination group numbers separated by a comma ",".
(Note 2) A subject and destination group numbers cannot be omitted. Specify them in the order of the above
table. The order of keywords cannot be changed.
(Note 3) Upper and lower case characters can be used for specifying keywords.
Setting example
Exam
S2 "GRPNO=0,SUBJECT=LogFileSend"
ple 1
Settings Subject: LogFileSend, Destination group number: 0
Exam
S2 "GrpNo=0+1+2+3+4+5,Subject=TestSend"
ple 2
Settings Subject: TestSend, Destination group numbers: 0,1,2,3,4,5
Exam
S2 "GrpNo=0+1+2+3+4+5,SubjectAUTO"
ple 3
Settings Subject: Automatic, Destination group numbers: 0,1,2,3,4,5
Subjects automatically generated
Subject automatically generated (Japanese)
Logging/Trace (LOG0)
Logging/Trace (LOG1)
Logging/Trace (LOG14)
Logging/Trace (LOG15)
■
Operand [S3] setting
● Specify the starting address of the device area that stores the string data that indicates mail
text, or a character constant.
● Enter a mail text within one-byte 256 characters.
17-132
Specify a destination group. (0 to 7) Specify the keyword "GRPNO="
at the beginning.
* Up to eight different group numbers connected with pluses (+) can
be selected at the same time.
Specify a mail subject.
● User-specified subject
Specify a mail subject.
Specify a subject for the keyword "SUBJECT=".
SUBJECT=xxxx
● Automatically-generated subject
A mail subject is automatically generated.
Specify the keyword "SUBJECTAUTO".
SUBJECTAUTO
* For details of subjects generated automatically, refer to
automatically generated".
Subject automatically generated (English)
Logging/Trace (LOG0)
Logging/Trace (LOG1)
Logging/Trace (LOG14)
Logging/Trace (LOG15)
Setting
range
0 to 7
User-
specified
time
Maximum
64 one-
byte
characters
"Subjects
WUME-FP7CPUPGR-12