Panasonic FP7 Series Command Reference Manual page 1015

Character strings added to mails (Japanese)
PLC status change (Power On)
PLC status change (Prog > Run)
PLC status change (Run > Prog)
PLC status change (Operation stop error)
PLC status change (Operation continuous error)
PLC status change (Error release)
SMTPcREQ command (PB##, xxxx)
(Note 1) IPv4 address is output only when using IPv4 address, and IPv6 address is output only when using
IPv6 address.
(Note 2) The language to be output to mails is specified in the mail server setting.
Device information added to mail text
Character strings added to mails (Japanese)
Device get information
Device number: DT100
Getting number: 4 devices
Conversion method
1234, 5558, 764, 18270
(Note 1) The language to be output to mails is specified in the mail server setting.
■
Operand [S4] Device setting
Set Description
Specify the source device setting.
● Global device
Specify device code + device number.
Example) such as "WX10", "WR1024", and "DT123456"
● Local device
"PB" + PB number + "_" (underbar) + Device code + Device number
Example) such as "PB1_WX50", "PB80_WR512", and "PB200_DT1024"
Devices that can be specified
Source
Global devices
device
setting
WX
WY
WR
WL
DT
LD
SD
WUME-FP7CPUPGR-12
17.24 SMTPcSET (Mail Transmission Setting)
Character strings added to mails (English)
PLC status change (Power On)
PLC status change (Prog > Run)
PLC status change (Run > Prog)
PLC status change (Operation stop error)
PLC status change (Operation continuous error)
PLC status change (Error release)
SMTPcREQ command (PB10, 100)
Character strings added to mails (English)
Device get information
Device number: DT100
Getting number: 4 devices
Exchange method:
1234, 5558, 764, 18270
Local devices
WX
WY
WR
WL
DT
LD
17-127