Panasonic FP7 Series Command Reference Manual page 1006

Hide thumbs Also See for FP7 Series:

Table of Contents

17.23 SMTPcADD (Destination Group Setting)

Domain name: Specified for [S3]

"TO=yamamoto,ito"

Destination address: Multiple addresses (yamamoto@pana.co.jp and ito@pana.co.jp) are

Domain name: Omitted for [S3], specified as "DOMAIN=pana.co.jp" for [S4].

"TO=suzuki@sunx.co.jp,yamamoto,ito"

Destination address: Multiple addresses are specified.

Domain name: Mix of specified/omitted for [S3], specified "DOMAIN= pana.co.jp" for [S4].

Operand [S4] setting

Specify the starting address of the device area that stores the string data that indicates a

destination address (domain name), or a character constant.

Setting item

When a domain name is omitted for the specification of the destination address of S3, a specified

domain name is added.

When all domain names are specified for the specification of the destination addresses of S3, the

specification of the domain name of S4 can be omitted.

Only one domain name can be specified.

Upper and lower case characters can be used for specifying keywords.

Setting example

"DOMAIN=sunx.co.jp"

Domain name: sunx.co.jp

"Domain=sunx.co.jp"

Domain name: sunx.co.jp

Domain name: Omitted

Flag operations

Set when a value outside the range is specified for the parameter.

To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).

To be set when even one request active relay of mail transmission control relay or mail

transmission logging/trace control relay is 1: Requesting.

To be set when the domain name for [S4] is omitted while the destination address [S3] is also

specified with the domain name omitted.

To be set when executed in an interrupt program.

Specify a destination address (domain name). Specify the

keyword "DOMAIN=" at the beginning.

DOMAIN=Domain name

WUME-FP7CPUPGR-12