Panasonic FP7 Series Command Reference Manual page 144

Hide thumbs Also See for FP7 Series:

Table of Contents

3.17 TM (Timer)

2) When the timer execution condition changes from OFF to ON (i.e., rises), the timer set value

is transferred from the set value area "TS" to the elapsed value area "TE" with the same

number. (This is also true when the operation mode is switched to RUN while the execution

condition is ON.)

3) For each scan, the value in the elapsed value area "TE" decrements if the execution

condition is ON.

WUME-FP7CPUPGR-12