Panasonic FP7 Series Command Reference Manual page 1025

■
Control relay
Name
Send request relay
Send active relay
Send retry active relay
Execution done relay
Execution result relay
Transfer direction relay
Reserved for system
Send cancel request relay
Send disable relay
(Note 1) The state of control relays can be read with ETSTAT instruction.
■
Done codes
Name
Execution done code
Send done code
(Note 1) The state of completion codes can be read with ETSTAT instruction.
When the instruction is executed under one of the following conditions, a transfer error occurs
and the corresponding error code is set in the execution done code.
Status
Destination server is not set.
Transfer setting is not set.
Destination group is not set.
Registering a process request failed.
■
SMTP client preparation done (WX6 bit 9)
Name
SMTP client preparation
done (X69)
(Note 1) For details of Ethernet-related flags, refer to
■
Flag operations
Name Description
To be set in the case of out-of-range in indirect access (index modification).
SR7
To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).
SR8
To be set when the SMTP client preparation done (X69) is OFF at the time of the execution of
(ER)
instruction.
WUME-FP7CPUPGR-12
17.26 SMTPcREQ (Mail Send Request)
Bit No. Description
0 0: No request, 1: Request
1 0: Stop, 1: During transfer
2 0: No retry, 1: During retry
3 0: During process, 1: Instruction execution complete
4 0: Normal 1: Failed
5 0: Send, 1: Receive
6 to 13 -
14 0: Not cancel, 1: Cancel
15 0: Transfer enabled, 1: Transfer disabled
Number of
Description
words
1 Execution done code
1 Response code of SMTP client
Code
1
2
3
4
Bit No. Description
0: SMTP client preparation incomplete, 1: SMTP client
9
preparation complete
Status
Transfer prohibition setting
Data decompression failed. (When
accessing data with PUT)
Data decompression failed. (When
accessing data with GET)
"19.10 Ethernet Function: IP
Code
5
8
9
Addresses".
17-137