Panasonic FP7 Series Command Reference Manual page 169

● When a 32-bit value is written into the elapsed value area CE while the counter is being
operated using an instruction such as MV instruction, the timer operates with the written 32-bit
value.
CT instruction (When specifying operand S=constant)
U100 is set in the setting value area CS0 when compiling the program. The setting value area
CS0 is set in the elapsed value area CE0 when the input of X101 falls. The setting range of a
constant is U0 to U4294967295.
CT16 instruction (When specifying operand S=constant)
U100 is set in the setting value area CS0 when compiling the program. The setting value area
CS0 is set in the elapsed value area CE0 when the input of X101 falls. The setting range of a
constant is U0 to U65535.
● When a 32-bit value is written into the elapsed value area CE while the counter is being
operated using an instruction such as MV instruction, the timer operates with the written 32-bit
value. When a 32-bit value is written into the setting value area CS, the timer operates with the
written 32-bit value.
WUME-FP7CPUPGR-12
3.21 CT16 (16-bit Counter)
3-65