Panasonic FP7 Series Command Reference Manual page 901

17.2 ETSTAT (Acquiring Ethernet Unit Information: IP/MAC/Destination)
Value
DT35 H00A8 (U168)
DT36 H0005 (U5)
DT37 H000B (U11)
DT38 H8001 (U32769)
Example 6) When specifying the destination port number for a specified IPv6
connection
The results are stored in the 52-word area that starts with [D].
[S1]... "IPv6" [S2]... "CONNECT1" [D]...DT0
Value
DT0 HFE80
DT1 H0011
DT2 H2233
DT3 H4455
DT4 H6677
DT5 H8899
DT6 HAABB
DT7 HCCDD
DT8
-
-DT15
DT16
-
-DT23
DT24
-
-DT31
DT32 H0100 (U64)
DT33 HFE80
DT34 H0000
DT35 H0000
DT36 H0000
DT37 H0000
DT38 H0000
DT39 H0000
DT40 H0001
DT41 H9001
DT42 H0001
DT43 HFE80
DT44 H0011
WUME-FP7CPUPGR-12
Description
Example) 192.168.5.1
The destination port number is stored.
Example) 32769
Description
The master unit IPv6 address (manual setting) is stored.
Example) fe80:0011:2233:4455:6677:8899:aabb:ccdd
The master unit IPv6 address (link local) is stored.
When [Automatically acquire IPv6 address] - [Acquire from router] is selected, the
master unit IPv6 address is stored. For manual setting, "0" is stored.
When [Automatically acquire IPv6 address] - [Acquire from DHCP] is selected,
the master unit IPv6 address is stored. For manual setting, "0" is stored.
The subnet prefix length is stored.
Example) 64
The IPv6 address of the default gateway is stored.
Example) fe80::1
The master unit port number is stored.
The type of the IP address is stored. For IPv6, the value is "1".
The destination IPv6 address is stored.
Example) fe80:0011:2233:4455:6677:8899:99AA:ccdd
17-13