Honda Accord 2008 Manual page 294

07/11/02 09:12:28 61TA0000_090_0007
8. Install the engine cover.
＊１６
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
9. Install the battery base, then install the harness
clamps (see step 64 on page 5-22).
10. Install the water separator (A) and the intake air
duct (B).
＊１７
A
11. Install the front grille cover:
• 2-door (see page 20-255)
• 4-door (see page 20-255)
12. Refill the radiator with engine coolant, and bleed
air from the cooling system with the heater valve
open (see step 6 on page 10-6).
13. Clean up any spilled engine coolant.
14. After installation, check that all tubes, hoses, and
connectors are installed correctly.
15. Do the battery installation procedure (see page
22-90).
B
9-7